Last year a new WiFi protocol, 802.11ac, who works at a frequency of 5GHz, but currently, most devi

How to increase the speed of our connection WiFi changing channels
Are you sick of your Internet go slow because of the WiFi and you arrive less megs of you hired? It is something that tends to happen and so there are several solutions. Today, we show you how to increase the speed of your WiFi by a method of changing channels. If you drive a little on the issue of routing, will not cost much.
But what are channels?, You may ask. Channels are the different frequency ranges including the WiFi works. They are strips of 22MHz frequency ranging tecnoalarm from 2.4GHz or 5GHz.
If you access the settings of your router, you're likely to find the word channel somewhere, and even more likely that its value is "Auto". As always, there are channels that come to us better or worse depending on the device. For now, let's focus on the main channels: tecnoalarm Channels 1, 6 and 11
Last year a new WiFi protocol, 802.11ac, who works at a frequency of 5GHz, but currently, most devices work with a WiFi 2.4GHz and will likely remain so for a long time was added.
All versions tecnoalarm except the current WiFi "ac" work with this scheme of frequencies between approximately 2400 and 2500MHz. 100MHz tecnoalarm that interval is divided into 14 different frequency channels, as you can see in the picture above. The problem is that these channels overlap, usually with 4 other channels, main reason for congestion home networks.
Fortunately, channels tecnoalarm 1, 6 and 11 do not overlap, so it will generally be more efficient to work with. It is easy to understand: if you're working on Channel 2 with your router and someone close to you accessed via channel 1, it is likely that both may prove a worse connection. To fix this, it is best that instead of connecting to channel tecnoalarm 2, do through tecnoalarm 6 or 11. Changing channel router tecnoalarm
As you can guess, it is impossible to make a list of tutorials to change channels from all routers. Fortunately, the process is similar in most of them and most operating systems, so I do not cost more or less following these steps. I will use a Cisco EPR2320R2 in Windows 8.
First, you must know the default tecnoalarm gateway of your router. You can do this in two ways: first and that I recommend is to look through the Network and Sharing Center resources. Usually it is 192.168.1.1.
After that, you introduce the same address in your browser. I asked for a password (different from the one you have to connect yourself), if you have never changed the default is determined by the manufacturer. Their values are usually "admin", "1234", or none. To assure that no neighbor you change the settings, it is best to replace it with your own.
Now you will see a window like this. What you have to do is access the configuration (setup), which surely you will find a section labeled "Wireless" or "WiFi".
In my case, clicking on "Basic" came to this new window, where only I have to go to Channel and change the default value that I want and click "Apply".
To notice a real improvement in our WiFi connection, there are programs that determine which channels are more saturated and thus choose the one that suits us. One is Vistumbler, free and easy to use.
I assure you that I have done and it works. tecnoalarm If you live in a villa or an area in which no more WiFi devices in addition to yours, it will serve you soon. But if you live in a place surrounded by neighbors who use the Internet, as usual, I assure you that you will notice. tecnoalarm Join in and make the most out of your connection. For any questions, we are here to help you.
No, what you're doing is opening the ports, nothing to do with the channels of the Wi-Fi network. You should look at the properties of wireless networks, where channel set. Go back to read the post, why you have not understood anything, and if you do not understand, do not.
Hi, I have 2.0 Orange livebox itself I believe. I do not know if it's right but only canal.Red WiFi (SSID) SSID VisibleModo 802.11bMixto 802.11g WiFi 802.11n 802.11gMixto tecnoalarm Mixed 802.11n, 802.11g and 802.11b Bandwidth 300 Mbps 150 Mbps (150 Mbps channels I = appears 20 MHz, 300 Mbps channels = 20/40 MHz) Channel 12345678910111213Auto Current Channel: 13
Just to make a clarification and additional recommendations. First, it is not a rule that channels 1, 6 and 11 do not overlap, but any channel two channels overlap more, for example if the neighbor uses channel tecnoalarm # 3, we should consider booking channels 4 and 5 of the neighbor and